Job Search

Electrical Design Engineer

Up to £55K per annum

We're recruiting for an exciting Electrical Design Engineer opportunity in Stoke-on-Trent, offering the chance to take ownership of complex engineering projects from initial concept through to design, testing and full-scale production.

Location: Stoke-on-Trent
Position: Electrical Design Engineer
Salary: £45K-£55K plus benefits
Permanent role
Visa sponsorship NOT PROVIDED.

What's on offer?

Lead and coordinate complex engineering projects.Drive new product introduction and continuous improvement.Collaborate with R&D, manufacturing and multidisciplinary engineering teams.Influence technical design, product quality, safety and reliability.Play a key role in delivering projects on time and within budget.

What are they looking for?

5+ years' relevant engineering experience.Experience delivering complex engineering projects.Strong technical design review and problem-solving skills.Experience coordinating engineering activities and supporting products through to manufacture.

If you're interested in getting more info, please contact Luana Ferreira on 07918 726944 or send your CV to [email protected]

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

High Voltage Technician

Stoke-on-Trent
£35,000 per annum

We are looking for a High Voltage Technician to join a specialist engineering and manufacturing team responsible for the build, installation, testing, commissioning, and maintenance of high-voltage electrical systems.

This is an exciting opportunity for an experienced electrical professional to work on advanced technologies within a regulated production environment, supporting product development, fault investigation, and continuous improvement activities.

Key Responsibilities

Build, install, test, commission, and maintain high-voltage equipment and systems.Carry out fault finding, diagnostics, and troubleshooting using specialist test equipment.Support operational testing and performance monitoring activities.Read and interpret electrical schematics, wiring diagrams, and technical documentation.Complete maintenance records, test reports, and technical documentation accurately.

Requirements

NVQ Level 3 or equivalent in Electrical Engineering, Power Systems, or a related discipline.Proven experience working with high-voltage electrical systems.Experience with installation, testing, commissioning, maintenance, and fault finding.Strong understanding of HV safety procedures, switching, and lockout/tagout (LOTO).Ability to read and interpret electrical schematics and wiring diagrams.Experience within a manufacturing, production, engineering, utilities, rail, power generation, or industrial environment.

Desirable Skills

HVDC systems experience.HV Authorised Person (AP) certification.IPC J-STD-001 soldering certification.Experience working with quality systems and controlled engineering documentation.Knowledge of transformers, converters, switchgear, control systems, and power distribution equipment

If you have the skills and experience outlined above and would like to be considered for this position, please contact Aadhya Kapoor on 01784775880 or send your CV to [email protected]

Alternatively, apply directly to this advert!

Proactive offers a referral scheme for successful applicants - if you refer someone suited to this role and they are placed by Proactive, you could receive £250. T&Cs apply

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Mechanical Assembly Technician

Stoke-on-Trent
£30,000/ Annum
Monday-Friday

Mechanical Assembly Technician urgently required to work for a world leading organisation, you will be part of a skilled production team responsible for assembling technically complex, high-value products. This is a great opportunity to join a forward-thinking business where you will work closely with Manufacturing Engineers and multiple internal departments to build state of the art equipment. We are looking for experienced Mechanical assembly technicians who can develop and grow within the role that would lead to future progression and responsibilities.

Responsibilities:

Assemble mechanical components and complete systems to engineering specifications.Carry out testing of sub-assemblies, including pressure, leak, and coolant system testing.Accurately record assembly work, test results, and any modifications completed.Work within quality standards and audited processes.Support product quality assurance activities, including root cause analysis of failed hardware.Collaborate with engineering and quality teams to resolve technical and production issues.Maintain a clean, safe, and organised working area

Qualifications:

Time-served mechanical experience is essential.Ability to read and interpret mechanical drawings and technical documentation is essential.Understanding of mechanical fasteners, bearings, gears, and hydraulic/pneumatic systems is essential.Experience in precision assembly or working with complex machinery is essential.Ability to work effectively in a fast-paced, multi-disciplinary environment is essential.Knowledge of design for manufacture within a production environment is essential.

Desirable Experience

BTEC Level 3 Diploma or Degree in a relevant mechanical or engineering discipline.Experience working with pressure systems and ultra-high vacuum systems.Experience using lifting equipment.Forklift truck and scissor lift operation experience.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

High Voltage Electrical Test & Commissioning Technician Required Stoke-on-Trent

The Role

We are seeking an experienced High Voltage Electrical Technician to join a specialist engineering team responsible for the installation, testing, commissioning and maintenance of high-voltage electrical equipment and power conversion systems.

The successful candidate will work with complex electrical equipment, including converters, transformers, filters and associated control systems, ensuring safe and reliable operation in accordance with technical specifications, quality standards and established safety procedures.

This role requires strong electrical engineering knowledge, practical diagnostic skills and a disciplined approach to safety, documentation and quality within a regulated engineering or manufacturing environment.

Key Responsibilities

Installation, Testing and Maintenance

Install, test, commission and maintain high-voltage electrical equipment, including converters, transformers, electrical filters and control systems.Carry out routine inspections, functional testing and maintenance activities to ensure equipment reliability and operational performance.Perform electrical diagnostics and fault-finding activities using specialist test equipment, measurement instruments and technical documentation.Investigate equipment faults, identify underlying causes and support the implementation of effective corrective actions.Assist with operational testing, system monitoring and control activities to verify equipment performance against required specifications.Support the configuration, testing and validation of electrical systems following installation, maintenance or modification.

High-Voltage Safety and Compliance

Carry out all work in accordance with high-voltage safety procedures, approved working practices and applicable electrical engineering standards.Follow established switching procedures, isolation requirements and lockout/tagout (LOTO) processes, in line with relevant authorisations and site procedures.Identify electrical hazards and ensure appropriate safety precautions are implemented before commencing work.Comply with applicable environmental requirements, workplace safety policies and engineering procedures.Ensure work is undertaken within the limits of personal competence, training and authorisation.

Quality Assurance and Documentation

Maintain accurate technical documentation, including maintenance records, test results, inspection reports and system configuration details.Work in accordance with established quality management systems, including ISO 9001 requirements and controlled engineering procedures.Support product quality investigations and root cause analysis of failed or defective hardware.Identify and report equipment defects, non-conformances and quality concerns promptly.Assist with corrective and preventive actions to address identified issues and minimise the risk of recurrence.Ensure engineering work is completed and recorded in accordance with approved specifications and documentation requirements.

Teamwork and Continuous Improvement

Collaborate with engineering, production, testing and quality teams to resolve technical issues and maintain equipment reliability.Contribute to improvements in maintenance procedures, testing methods and operational practices.Maintain a professional, accountable and safety-conscious approach to all assigned responsibilities.Demonstrate integrity, innovation and effective teamwork while adhering to organisational policies and professional conduct standards.

Essential Requirements

NVQ Level 3 or equivalent qualification in Electrical Engineering, Power Systems or a related discipline.Proven practical experience working with high-voltage electrical systems and associated equipment.Strong understanding of high-voltage safety procedures, including electrical isolation, switching and lockout/tagout practices.Ability to read, interpret and work from electrical schematics, wiring diagrams and technical manuals.Experience working within a regulated engineering, electrical installation, testing or manufacturing environment.Competence in electrical fault finding, diagnostics and the use of appropriate test equipment.Understanding of electrical testing, commissioning and maintenance procedures.Strong attention to detail, with a commitment to safety, technical accuracy and quality compliance.Ability to maintain accurate engineering records and follow formal procedures.

Desirable Qualifications and Experience

Experience working with high-voltage direct current (HVDC) systems.High Voltage Authorised Person (HV AP) certification or equivalent relevant authorisation.IPC J-STD-001 certification in soldered electrical and electronic assemblies.Familiarity with ISO 9001 quality management systems, quality investigations and controlled engineering documentation.Experience supporting root cause analysis, equipment failure investigations and corrective actions.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Electrical Controls Engineer Required Stoke-on-Trent

We are seeking an Electrical Controls Engineer to support the design, development, programming and implementation of electrical control systems for specialist industrial equipment.

Working closely with Engineering, Research and Development, Project Management, Production and Service teams, you will contribute to the delivery of new and existing products, from initial design and software development through to factory testing, commissioning and ongoing technical support.

The successful candidate will combine strong electrical engineering knowledge with practical PLC programming and control system design experience. This is an opportunity to contribute to technically challenging projects, support new product development and drive improvements in system performance, reliability and manufacturing efficiency.

Key Responsibilities

Electrical Design and Documentation

Interpret technical specifications and customer requirements in collaboration with Sales, Project Management and Engineering teams.Produce and maintain technical documentation to support electrical designs, control systems and product development.Generate and export Bills of Materials (BoMs) for electrical hardware and associated components.Develop and maintain electrical designs using appropriate CAD platforms, ensuring compliance with relevant engineering standards.Release and manage engineering designs and documentation through Product Lifecycle Management (PLM) systems, following formal Engineering Change Order (ECO) procedures.

PLC Programming and Control Systems

Develop, modify and maintain PLC software using platforms such as Rockwell Studio 5000 and CODESYS, in accordance with established system architectures.Design, configure and program Human-Machine Interface (HMI) screens to meet operational and system requirements.Program and configure variable frequency drives (VFDs) and servo drives within Rockwell automation environments.Support the integration of electrical hardware, control systems and software to ensure reliable system operation.Contribute to the verification and validation of control system designs through simulation, testing and technical analysis.

Production, Testing and Commissioning

Provide technical engineering support throughout manufacturing, assembly, testing and commissioning activities.Assist with the transition of new products from the design and development phase into production.Support factory acceptance testing, commissioning and troubleshooting of specialist equipment.Provide on-site technical support for installation, commissioning and service teams, including travel to customer locations where required.Investigate technical issues arising during production or commissioning and support the implementation of effective solutions.Ensure engineering activities comply with applicable safety requirements, quality procedures and technical specifications.

Research, Development and Continuous Improvement

Work alongside Research and Development teams to evaluate and implement new technologies and engineering solutions.Contribute to product development activities, supporting the introduction of new designs and technologies into production.Identify opportunities for design optimisation, cost reduction, improved performance and enhanced product reliability.Support engineering change requests (ECRs), assessing and implementing approved design modifications.Maintain awareness of relevant technological developments, industry standards and engineering best practices.Participate in engineering reviews and technical discussions to support product improvement and future development initiatives.Contribute to project delivery plans and wider business objectives through effective engineering support.

Quality, Safety and Compliance

Follow established quality management systems, engineering procedures and workplace health and safety requirements.Maintain accurate engineering records and ensure design changes are documented and controlled appropriately.Identify and report product defects, quality concerns and non-conformances promptly.Support corrective actions to address technical or quality issues and help prevent recurrence.Demonstrate professional conduct, accountability, integrity and effective teamwork in all engineering activities.

Essential Requirements

BEng, BSc or equivalent qualification and experience in Electrical Engineering, Electrical and Electronic Engineering, Controls Engineering or a related discipline.Approximately 2-3 years' relevant experience in electrical engineering, automation, controls or a similar technical role.Practical experience programming PLC systems using platforms such as Rockwell Studio 5000 and/or CODESYS.Strong understanding of electrical control systems, including PLC controllers and industrial automation principles.Experience programming or configuring variable frequency drives (VFDs) and servo drives, preferably within Rockwell environments.Experience using electrical design or CAD software, such as AutoCAD, EPLAN or SolidWorks Electrical.Ability to interpret technical specifications and translate engineering requirements into practical design solutions.Strong problem-solving skills and the ability to investigate technical issues systematically.Good organisational and time management skills, with the ability to manage competing priorities and respond to changing business requirements.Proficiency in Microsoft Office applications, including Excel, Word, Outlook, PowerPoint, OneNote and Teams.Ability to work effectively both independently and as part of a multidisciplinary engineering team.Willingness to travel to support customer installations, commissioning and service activities.Strong communication and presentation skills when working with internal stakeholders and external customers.

Working Environment

This role offers a varied engineering workload spanning electrical design, PLC programming, product development, manufacturing support and on-site commissioning. The successful candidate will work closely with technical specialists across the business, contributing to the development and delivery of reliable, high-performance industrial equipment.

Flexibility, a proactive approach to problem-solving and a commitment to engineering quality will be essential to success in the role.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Mechanical Assembly Technician Required Stoke-on-Trent - Immediate Start Available

We are seeking an experienced Mechanical Assembly Technician to join a skilled engineering and production team within a specialist manufacturing environment. The successful candidate will be responsible for assembling complex mechanical equipment and high-value engineered products to precise technical specifications.

Working closely with Manufacturing Engineering, Research and Development, and Quality teams, you will contribute to the assembly, testing and validation of advanced inspection equipment. The role offers the opportunity to work on technically challenging products while supporting quality assurance, problem-solving and continuous improvement initiatives.

Key Responsibilities

Assemble mechanical components, sub-assemblies and complete systems in accordance with engineering drawings, technical specifications and approved procedures.Perform functional and integrity testing of sub-assemblies, including pressure, leak and coolant system testing.Accurately document assembly activities, test results, modifications and any non-conformances identified during production.Ensure all work complies with established quality management systems, ISO 9001 requirements and controlled manufacturing procedures.Support quality assurance activities, including the investigation and root cause analysis of hardware failures and assembly defects.Collaborate with engineering, manufacturing and quality teams to resolve technical issues and improve product reliability.Identify and report defects, non-conformances and process issues promptly, supporting corrective and preventive actions.Maintain a clean, safe and organised working environment in accordance with 5S principles and workplace health and safety requirements.Contribute to continuous improvement activities focused on product quality, assembly efficiency and manufacturing processes.Adhere to company policies, professional conduct standards and ethical working practices, demonstrating integrity, accountability and effective teamwork.

Essential Requirements

Proven experience in mechanical assembly or a closely related engineering discipline.Ability to read, interpret and work accurately from mechanical engineering drawings and technical documentation.Strong understanding of mechanical components and assemblies, including fasteners, bearings, gears and hydraulic or pneumatic systems.Demonstrable experience in precision assembly, complex machinery or the manufacture of engineered equipment.Understanding of design for manufacture principles within a production environment.Ability to work effectively within a multidisciplinary engineering team and manage competing priorities in a fast-paced manufacturing environment.Strong attention to detail, with a commitment to quality, accuracy and safe working practices.Ability to maintain accurate technical records and follow documented processes and procedures.

Desirable Qualifications and Experience

BTEC Level 3 Diploma, degree or equivalent qualification in mechanical engineering, manufacturing engineering or a related discipline.Experience working with pressure systems and/or ultra-high vacuum (UHV) systems.Experience operating lifting equipment within a manufacturing or engineering environment.Current forklift truck and/or scissor lift operating qualifications and practical experience.

Working Environment

This is a hands-on engineering role within a specialist manufacturing environment, requiring precision, technical capability and a strong commitment to quality. The successful candidate will work collaboratively with engineering and production colleagues to deliver reliable, high-quality equipment in line with technical specifications, safety requirements and production schedules.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

About the Role

We are recruiting for an experienced Service Technician / Maintenance Engineer to join a specialist engineering team responsible for maintaining, servicing and repairing automated material handling and conveyor systems within a fast-paced distribution environment.

This is an excellent opportunity for a mechanically or electrically skilled engineer looking to develop their career within the automation and material handling industry.

The successful candidate will be responsible for carrying out planned preventative maintenance, responding to breakdowns and ensuring automated equipment operates safely, efficiently and reliably.

Key ResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive maintenance on automated conveyor and material handling systems.Diagnose and repair mechanical and electrical faults on automated equipment.Maintain conveyors, motors, gearboxes, rollers, bearings, drives, sensors and associated machinery.Respond efficiently to equipment breakdowns to minimise downtime and maintain operational performance.Conduct routine inspections, servicing and repairs on automated machinery.Assist with PLC fault finding, electrical diagnostics and control system troubleshooting.Identify recurring equipment faults and recommend improvements to system reliability.Complete maintenance records, reports and technical documentation accurately.Follow health and safety procedures, including safe isolation and lockout/tagout practices.Work collaboratively with the wider engineering team to maintain high equipment availability.Essential RequirementsNVQ Level 3, City & Guilds Level 3 or equivalent in Electrical, Mechanical, Mechatronics or Maintenance Engineering.Previous experience working as a Service Technician, Maintenance Engineer or similar engineering professional.Strong mechanical and/or electrical fault-finding skills.Experience maintaining industrial machinery, automated systems, conveyors or production equipment.Good understanding of planned preventative maintenance and reactive breakdown procedures.Ability to work a 2-week rotating day and night shift pattern.Full right to work in the UK without requiring sponsorship.Desirable ExperienceAutomated warehouse or distribution centre maintenance.Conveyor systems, sortation equipment and automated material handling machinery.Motors, gearboxes, bearings, belts and mechanical drive systems.Sensors, inverters, control panels and PLC diagnostics.Experience within logistics, FMCG, manufacturing or automated distribution environments.Experience maintaining complex electromechanical systems.What's on Offer?Permanent, full-time employment.2-week rotating day and night shift pattern.Opportunity to work with modern automated equipment and technology.Ongoing technical training and professional development.Supportive engineering team and long-term career opportunities.Apply Today

If you are a qualified Mechanical, Electrical or Multi-Skilled Maintenance Engineer with experience maintaining automated equipment, conveyor systems or industrial machinery, we would love to hear from you.

Apply now to find out more about this opportunity in Burton-on-Trent!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Requirements

Technical expertise in mechanical, electrical, and PLC systems.Relevant engineering or technical qualifications (e.g., City and Guilds, NVQ, HNC).Proven experience in industrial maintenance, preferably in automated environments.Strong problem-solving and diagnostic skills.Effective communication and team-working abilities.Flexibility to work varied hours as needed.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

We are looking for a Technical Specialist to join a highly automated warehouse and material handling
environment. This person will act as the on-site technical escalation lead, supporting complex automation and
controls issues across automated systems and conveyors. The role is hands-on and operational, focused on fault
finding, root cause analysis, system reliability, and supporting engineering teams on shift.
Key Responsibilities
* Act as the lead escalation point for complex technical faults
* Diagnose and resolve PLC, controls, electrical and mechanical issues
* Support and guide shift engineers with technical expertise
* Carry out root cause analysis and implement long-term fixes
* Improve uptime, reliability and overall system performance
* Manage PLC software backups, modifications and version control
* Work closely with operations teams, customers and third-party suppliers
* Support continuous improvement activities across site
Skills & Experience Required
* Strong background in Controls / Automation Engineering
* Experience with Siemens S7 / TIA Portal PLC systems
* Knowledge of SCADA and automated systems
* Strong fault finding and troubleshooting ability
* Experience within warehouse automation, material handling, conveyors, FMCG or manufacturing automation
* Comfortable working in a fast-paced operational environment
* Strong communication and stakeholder engagement skills
Ideal Candidate
* Hands-on senior engineer
* Strong technical problem solver
* Able to act as the technical 'go-to' person on-site
* Background in warehouse automation, manufacturing automation or material handling

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less