Job Search

High Voltage Electrical Test & Commissioning Technician Required Stoke-on-Trent

The Role

We are seeking an experienced High Voltage Electrical Technician to join a specialist engineering team responsible for the installation, testing, commissioning and maintenance of high-voltage electrical equipment and power conversion systems.

The successful candidate will work with complex electrical equipment, including converters, transformers, filters and associated control systems, ensuring safe and reliable operation in accordance with technical specifications, quality standards and established safety procedures.

This role requires strong electrical engineering knowledge, practical diagnostic skills and a disciplined approach to safety, documentation and quality within a regulated engineering or manufacturing environment.

Key Responsibilities

Installation, Testing and Maintenance

Install, test, commission and maintain high-voltage electrical equipment, including converters, transformers, electrical filters and control systems.Carry out routine inspections, functional testing and maintenance activities to ensure equipment reliability and operational performance.Perform electrical diagnostics and fault-finding activities using specialist test equipment, measurement instruments and technical documentation.Investigate equipment faults, identify underlying causes and support the implementation of effective corrective actions.Assist with operational testing, system monitoring and control activities to verify equipment performance against required specifications.Support the configuration, testing and validation of electrical systems following installation, maintenance or modification.

High-Voltage Safety and Compliance

Carry out all work in accordance with high-voltage safety procedures, approved working practices and applicable electrical engineering standards.Follow established switching procedures, isolation requirements and lockout/tagout (LOTO) processes, in line with relevant authorisations and site procedures.Identify electrical hazards and ensure appropriate safety precautions are implemented before commencing work.Comply with applicable environmental requirements, workplace safety policies and engineering procedures.Ensure work is undertaken within the limits of personal competence, training and authorisation.

Quality Assurance and Documentation

Maintain accurate technical documentation, including maintenance records, test results, inspection reports and system configuration details.Work in accordance with established quality management systems, including ISO 9001 requirements and controlled engineering procedures.Support product quality investigations and root cause analysis of failed or defective hardware.Identify and report equipment defects, non-conformances and quality concerns promptly.Assist with corrective and preventive actions to address identified issues and minimise the risk of recurrence.Ensure engineering work is completed and recorded in accordance with approved specifications and documentation requirements.

Teamwork and Continuous Improvement

Collaborate with engineering, production, testing and quality teams to resolve technical issues and maintain equipment reliability.Contribute to improvements in maintenance procedures, testing methods and operational practices.Maintain a professional, accountable and safety-conscious approach to all assigned responsibilities.Demonstrate integrity, innovation and effective teamwork while adhering to organisational policies and professional conduct standards.

Essential Requirements

NVQ Level 3 or equivalent qualification in Electrical Engineering, Power Systems or a related discipline.Proven practical experience working with high-voltage electrical systems and associated equipment.Strong understanding of high-voltage safety procedures, including electrical isolation, switching and lockout/tagout practices.Ability to read, interpret and work from electrical schematics, wiring diagrams and technical manuals.Experience working within a regulated engineering, electrical installation, testing or manufacturing environment.Competence in electrical fault finding, diagnostics and the use of appropriate test equipment.Understanding of electrical testing, commissioning and maintenance procedures.Strong attention to detail, with a commitment to safety, technical accuracy and quality compliance.Ability to maintain accurate engineering records and follow formal procedures.

Desirable Qualifications and Experience

Experience working with high-voltage direct current (HVDC) systems.High Voltage Authorised Person (HV AP) certification or equivalent relevant authorisation.IPC J-STD-001 certification in soldered electrical and electronic assemblies.Familiarity with ISO 9001 quality management systems, quality investigations and controlled engineering documentation.Experience supporting root cause analysis, equipment failure investigations and corrective actions.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Electrical Controls Engineer Required Stoke-on-Trent

We are seeking an Electrical Controls Engineer to support the design, development, programming and implementation of electrical control systems for specialist industrial equipment.

Working closely with Engineering, Research and Development, Project Management, Production and Service teams, you will contribute to the delivery of new and existing products, from initial design and software development through to factory testing, commissioning and ongoing technical support.

The successful candidate will combine strong electrical engineering knowledge with practical PLC programming and control system design experience. This is an opportunity to contribute to technically challenging projects, support new product development and drive improvements in system performance, reliability and manufacturing efficiency.

Key Responsibilities

Electrical Design and Documentation

Interpret technical specifications and customer requirements in collaboration with Sales, Project Management and Engineering teams.Produce and maintain technical documentation to support electrical designs, control systems and product development.Generate and export Bills of Materials (BoMs) for electrical hardware and associated components.Develop and maintain electrical designs using appropriate CAD platforms, ensuring compliance with relevant engineering standards.Release and manage engineering designs and documentation through Product Lifecycle Management (PLM) systems, following formal Engineering Change Order (ECO) procedures.

PLC Programming and Control Systems

Develop, modify and maintain PLC software using platforms such as Rockwell Studio 5000 and CODESYS, in accordance with established system architectures.Design, configure and program Human-Machine Interface (HMI) screens to meet operational and system requirements.Program and configure variable frequency drives (VFDs) and servo drives within Rockwell automation environments.Support the integration of electrical hardware, control systems and software to ensure reliable system operation.Contribute to the verification and validation of control system designs through simulation, testing and technical analysis.

Production, Testing and Commissioning

Provide technical engineering support throughout manufacturing, assembly, testing and commissioning activities.Assist with the transition of new products from the design and development phase into production.Support factory acceptance testing, commissioning and troubleshooting of specialist equipment.Provide on-site technical support for installation, commissioning and service teams, including travel to customer locations where required.Investigate technical issues arising during production or commissioning and support the implementation of effective solutions.Ensure engineering activities comply with applicable safety requirements, quality procedures and technical specifications.

Research, Development and Continuous Improvement

Work alongside Research and Development teams to evaluate and implement new technologies and engineering solutions.Contribute to product development activities, supporting the introduction of new designs and technologies into production.Identify opportunities for design optimisation, cost reduction, improved performance and enhanced product reliability.Support engineering change requests (ECRs), assessing and implementing approved design modifications.Maintain awareness of relevant technological developments, industry standards and engineering best practices.Participate in engineering reviews and technical discussions to support product improvement and future development initiatives.Contribute to project delivery plans and wider business objectives through effective engineering support.

Quality, Safety and Compliance

Follow established quality management systems, engineering procedures and workplace health and safety requirements.Maintain accurate engineering records and ensure design changes are documented and controlled appropriately.Identify and report product defects, quality concerns and non-conformances promptly.Support corrective actions to address technical or quality issues and help prevent recurrence.Demonstrate professional conduct, accountability, integrity and effective teamwork in all engineering activities.

Essential Requirements

BEng, BSc or equivalent qualification and experience in Electrical Engineering, Electrical and Electronic Engineering, Controls Engineering or a related discipline.Approximately 2-3 years' relevant experience in electrical engineering, automation, controls or a similar technical role.Practical experience programming PLC systems using platforms such as Rockwell Studio 5000 and/or CODESYS.Strong understanding of electrical control systems, including PLC controllers and industrial automation principles.Experience programming or configuring variable frequency drives (VFDs) and servo drives, preferably within Rockwell environments.Experience using electrical design or CAD software, such as AutoCAD, EPLAN or SolidWorks Electrical.Ability to interpret technical specifications and translate engineering requirements into practical design solutions.Strong problem-solving skills and the ability to investigate technical issues systematically.Good organisational and time management skills, with the ability to manage competing priorities and respond to changing business requirements.Proficiency in Microsoft Office applications, including Excel, Word, Outlook, PowerPoint, OneNote and Teams.Ability to work effectively both independently and as part of a multidisciplinary engineering team.Willingness to travel to support customer installations, commissioning and service activities.Strong communication and presentation skills when working with internal stakeholders and external customers.

Working Environment

This role offers a varied engineering workload spanning electrical design, PLC programming, product development, manufacturing support and on-site commissioning. The successful candidate will work closely with technical specialists across the business, contributing to the development and delivery of reliable, high-performance industrial equipment.

Flexibility, a proactive approach to problem-solving and a commitment to engineering quality will be essential to success in the role.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Mechanical Assembly Technician Required Stoke-on-Trent - Immediate Start Available

We are seeking an experienced Mechanical Assembly Technician to join a skilled engineering and production team within a specialist manufacturing environment. The successful candidate will be responsible for assembling complex mechanical equipment and high-value engineered products to precise technical specifications.

Working closely with Manufacturing Engineering, Research and Development, and Quality teams, you will contribute to the assembly, testing and validation of advanced inspection equipment. The role offers the opportunity to work on technically challenging products while supporting quality assurance, problem-solving and continuous improvement initiatives.

Key Responsibilities

Assemble mechanical components, sub-assemblies and complete systems in accordance with engineering drawings, technical specifications and approved procedures.Perform functional and integrity testing of sub-assemblies, including pressure, leak and coolant system testing.Accurately document assembly activities, test results, modifications and any non-conformances identified during production.Ensure all work complies with established quality management systems, ISO 9001 requirements and controlled manufacturing procedures.Support quality assurance activities, including the investigation and root cause analysis of hardware failures and assembly defects.Collaborate with engineering, manufacturing and quality teams to resolve technical issues and improve product reliability.Identify and report defects, non-conformances and process issues promptly, supporting corrective and preventive actions.Maintain a clean, safe and organised working environment in accordance with 5S principles and workplace health and safety requirements.Contribute to continuous improvement activities focused on product quality, assembly efficiency and manufacturing processes.Adhere to company policies, professional conduct standards and ethical working practices, demonstrating integrity, accountability and effective teamwork.

Essential Requirements

Proven experience in mechanical assembly or a closely related engineering discipline.Ability to read, interpret and work accurately from mechanical engineering drawings and technical documentation.Strong understanding of mechanical components and assemblies, including fasteners, bearings, gears and hydraulic or pneumatic systems.Demonstrable experience in precision assembly, complex machinery or the manufacture of engineered equipment.Understanding of design for manufacture principles within a production environment.Ability to work effectively within a multidisciplinary engineering team and manage competing priorities in a fast-paced manufacturing environment.Strong attention to detail, with a commitment to quality, accuracy and safe working practices.Ability to maintain accurate technical records and follow documented processes and procedures.

Desirable Qualifications and Experience

BTEC Level 3 Diploma, degree or equivalent qualification in mechanical engineering, manufacturing engineering or a related discipline.Experience working with pressure systems and/or ultra-high vacuum (UHV) systems.Experience operating lifting equipment within a manufacturing or engineering environment.Current forklift truck and/or scissor lift operating qualifications and practical experience.

Working Environment

This is a hands-on engineering role within a specialist manufacturing environment, requiring precision, technical capability and a strong commitment to quality. The successful candidate will work collaboratively with engineering and production colleagues to deliver reliable, high-quality equipment in line with technical specifications, safety requirements and production schedules.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Position: Welder / Fabricator

Location: Bedfordshire

Salary: £15-£16 per hour

Proactive are currently recruiting for multiple skilled Welder / Fabricator in Bedfordshire to start immediately.

Your daily duties will include:

TIG and MIG welding and fabricationWorking predominately with stainless steel and some aluminium

To be considered for this role you will need the following skills/experience:

Previous experience in both TIG and MIG welding & fabricationGood working within a team and on your own initiativeGood attention to detail in order to understand and correctly follow processesGood communication skills

How to Apply:

For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jared Raymond on [email protected]

Why work with Proactive?

Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias.

When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Forklift Drivers Required Dunstable

Accredited Counterbalance Forklift Licence Required

Location: Dunstable

Hours: Monday to Friday, PM Shifts

2:00pm - 10:00pm (PM Shift)

The Opportunity

We are currently recruiting for an experienced Forklift Drivers to join a well-established and successful company based in Dunstable.

This is a full-time, ongoing opportunity working within a busy warehouse and goods handling environment. The successful candidate will hold a valid accredited Counterbalance Forklift Truck licence and have previous experience working within Goods In and Despatch operations.

Key Responsibilities

As a Forklift Driver / Warehouse Operative, your duties will include:

Operating a Counterbalance Forklift Truck safely and efficiently.Loading and unloading deliveries.Receiving, checking and booking goods into the warehouse using the company's stock control system.Moving stock to the correct storage locations.Picking, preparing and despatching customer orders.Carrying out stock movements and ensuring accurate inventory records.Completing warehouse documentation accurately.Maintaining a clean, organised and safe working environment.Adhering to all Health and Safety policies and warehouse procedures.Supporting the wider warehouse team with general duties as required.

Candidate Requirements

To be successful in this role, you will have:

A valid accredited Counterbalance Forklift Truck licence.Previous experience within a warehouse, Goods In or Despatch environment.Experience using warehouse or stock management systems.Good IT skills with the ability to input and update stock accurately.A strong understanding of Health and Safety procedures within a warehouse environment.Excellent attention to detail and accuracy.Good communication skills and the ability to work effectively as part of a team.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Position: Production Operative

Location: Aylesbury

Shift: Monday- Friday 10pm - 6:30am

Proactive are currently working with a client who are a market leader in their field based in Aylesbury.

The client are currently in need of a Production Operative. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work.

Your daily duties will include:

Production PackingRunning LinesFeeding Bottles through MachineryGood Manufacturing Process knowledge

To be considered for this role you will need the following skills/experience:

Previous experience in a production/manufacturing setting.

If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail.

How to Apply:

For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on 07801 984734 or [email protected] .

Why work with Proactive?

Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias.

When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Paint Preparation & Finishing Assistant

Proactive Global is looking for a practical and detail-focused Paint Preparation & Finishing Assistant to join a busy manufacturing environment.

The successful candidate will support the paint department, preparing lighting components for painting and finishing. Responsibilities will include surface preparation, sanding, masking, priming and assisting with spray painting, ensuring all components meet the required standards of quality, consistency and presentation.

Responsibilities

Prepare lighting components and manufactured parts for painting and finishing.Clean, sand, rub down, mask and prime surfaces to ensure optimal paint adhesion.Set up and prepare spray painting equipment, ensuring it is ready for use.Mix and prepare paints and other materials in accordance with the required specifications.Assist with spraying and finishing components to achieve a high-quality finish.Carry out visual inspections to identify defects such as drips, uneven coverage, scratches or imperfections.Correct minor finishing issues where required before components move to the next stage of production.Clean and maintain painting equipment, including spray guns, hoses, booths, ovens and filters.Follow health and safety procedures when handling paints, chemicals and other hazardous materials.Wear appropriate personal protective equipment (PPE), including respirators, gloves and safety goggles.Monitor paint and material supplies and report shortages when necessary.Identify and report issues relating to paint application, equipment performance or finished components.Maintain a clean, organised and safe working area.Work closely with colleagues across the production team to meet daily manufacturing targets and deadlines.Follow established production methods and quality standards to ensure consistent results.

Requirements

Previous experience in paint preparation, finishing or a similar role within a manufacturing environment is desirable.Excellent attention to detail and a quality-focused approach to work.Good manual dexterity and practical hand skills.The ability to follow instructions and established procedures accurately.Good visual awareness and full colour vision.The ability to identify imperfections and maintain high finishing standards.A reliable, organised and proactive approach to work.The ability to work effectively as part of a team in a busy production environment.An understanding of workplace health and safety procedures is advantageous.

How to Apply:

For more information on the role, or an informal discussion regarding opportunities we have available, please contact Victoria Pseftoudis on [email protected] or call on +44 (0)7570 420118

Why work with Proactive?

Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias.

When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

About the Role

We are recruiting for an experienced Field Service Engineer to join a specialist engineering team responsible for maintaining, servicing and repairing automated material handling systems across customer sites throughout London and surrounding areas.

This is an excellent opportunity for a mechanically biased or multi-skilled engineer with strong fault-finding abilities and experience working on automated machinery, conveyor systems or industrial equipment.

The successful candidate will travel between customer sites, providing breakdown support, preventative maintenance and technical assistance to ensure equipment operates safely and efficiently.

Key ResponsibilitiesCarry out reactive breakdown maintenance and planned servicing on automated material handling equipment.Diagnose and repair mechanical and electrical faults on industrial machinery.Maintain conveyors, motors, gearboxes, bearings, drives, sensors and associated equipment.Respond to customer breakdowns, identifying faults and implementing effective repairs.Perform mechanical adjustments, component replacements and equipment inspections.Assist with electrical fault finding, PLC diagnostics and control system troubleshooting.Work on automated warehouse systems, sortation equipment and associated machinery.Support equipment installations, modifications and commissioning activities where required.Complete service reports, maintenance records and technical documentation.Maintain excellent customer relationships while delivering a professional field service.Essential RequirementsNVQ Level 3, City & Guilds Level 3 or equivalent in Mechanical, Electrical or Maintenance Engineering.Strong mechanical fault-finding skills with a good understanding of electrical systems.Experience maintaining industrial machinery, automated systems or material handling equipment.Previous experience in maintenance engineering, field service or breakdown support.Ability to work independently and troubleshoot complex equipment faults.Full UK driving licence.Willingness to travel between customer sites and participate in a 1-in-3 on-call rota.Full right to work in the UK without requiring sponsorship.Desirable ExperienceAutomated warehouse and distribution equipment.Conveyor systems, sortation machinery and automated storage systems.Motors, gearboxes, bearings, chains and mechanical drives.PLC fault finding, sensors, inverters and control panels.Hydraulic and pneumatic systems.Experience within logistics, FMCG, manufacturing or automated distribution.What's on Offer?Circa £45,000 basic salary.£70,000+ potential OTE.Paid door-to-door travel.Company van provided.Overtime opportunities and additional on-call payments.Monday to Friday daytime working.1-in-3 on-call rota.Specialist technical training and development.Permanent position with long-term career progression.Apply Today

If you are a qualified Mechanical or Multi-Skilled Engineer with strong fault-finding experience and an interest in working on advanced automated machinery, we would love to hear from you.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

About the Role

We are recruiting for experienced Service Technicians / Maintenance Engineers to join a specialist engineering team responsible for maintaining, servicing and repairing automated material handling and conveyor systems within a fast-paced, highly automated environment.

This is an excellent opportunity for mechanically or electrically skilled engineers looking to develop their careers within the automation and material handling industry.

The successful candidates will be responsible for carrying out planned preventative maintenance, responding to equipment breakdowns and ensuring automated systems operate safely, efficiently and reliably.

Key ResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive maintenance on automated conveyor and material handling systems.Diagnose and repair mechanical and electrical faults on automated equipment.Maintain conveyors, motors, gearboxes, rollers, bearings, drives, sensors and associated machinery.Respond efficiently to equipment breakdowns to minimise downtime and maintain operational performance.Conduct routine inspections, servicing and repairs on automated machinery.Assist with PLC fault finding, electrical diagnostics and control system troubleshooting.Identify recurring equipment faults and recommend improvements to system reliability.Complete maintenance records, reports and technical documentation accurately.Follow health and safety procedures, including safe isolation and lockout/tagout practices.Work collaboratively with the wider engineering team to maintain high equipment availability.Essential RequirementsNVQ Level 3, City & Guilds Level 3 or equivalent in Electrical, Mechanical, Mechatronics or Maintenance Engineering.Previous experience working as a Service Technician, Maintenance Engineer or similar engineering professional.Strong mechanical and/or electrical fault-finding skills.Experience maintaining industrial machinery, automated systems, conveyors or production equipment.Good understanding of planned preventative maintenance and reactive breakdown procedures.Ability to work a 4 on, 4 off rotating day and night shift pattern.Full right to work in the UK without requiring sponsorship.Ability to meet the required background screening and security clearance requirements.Desirable ExperienceAutomated warehouse or distribution centre maintenance.Conveyor systems, sortation equipment and automated material handling machinery.Motors, gearboxes, bearings, belts and mechanical drive systems.Sensors, inverters, control panels and PLC diagnostics.Experience within logistics, FMCG, manufacturing or automated distribution environments.Experience maintaining complex electromechanical systems.What's on Offer?£52,500 annual salary including shift allowance.Permanent, full-time employment.4 on, 4 off rotating day and night shift pattern.Extended periods of time off between shifts.Opportunity to work with modern automated equipment and technology.Ongoing technical training and professional development.Supportive engineering team and long-term career opportunities.Apply Today

If you are a qualified Mechanical, Electrical or Multi-Skilled Maintenance Engineer with experience maintaining automated equipment, conveyor systems or industrial machinery, we would love to hear from you.

Apply now to find out more about this opportunity in the Heathrow area!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

About the Role

We are recruiting for 5 experienced Service Technicians / Maintenance Engineers to join a specialist engineering team responsible for maintaining, servicing and repairing automated material handling and conveyor systems within a fast-paced, highly automated environment.

This is an excellent opportunity for mechanically or electrically skilled engineers looking to develop their careers within the automation and material handling industry.

The successful candidates will be responsible for carrying out planned preventative maintenance, responding to equipment breakdowns and ensuring automated systems operate safely, efficiently and reliably.

Key ResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive maintenance on automated conveyor and material handling systems.Diagnose and repair mechanical and electrical faults on automated equipment.Maintain conveyors, motors, gearboxes, rollers, bearings, drives, sensors and associated machinery.Respond efficiently to equipment breakdowns to minimise downtime and maintain operational performance.Conduct routine inspections, servicing and repairs on automated machinery.Assist with PLC fault finding, electrical diagnostics and control system troubleshooting.Identify recurring equipment faults and recommend improvements to system reliability.Complete maintenance records, reports and technical documentation accurately.Follow health and safety procedures, including safe isolation and lockout/tagout practices.Work collaboratively with the wider engineering team to maintain high equipment availability.Essential RequirementsNVQ Level 3, City & Guilds Level 3 or equivalent in Electrical, Mechanical, Mechatronics or Maintenance Engineering.Previous experience working as a Service Technician, Maintenance Engineer or similar engineering professional.Strong mechanical and/or electrical fault-finding skills.Experience maintaining industrial machinery, automated systems, conveyors or production equipment.Good understanding of planned preventative maintenance and reactive breakdown procedures.Ability to work a 4 on, 4 off rotating day and night shift pattern.Full right to work in the UK without requiring sponsorship.Ability to meet the required background screening and security clearance requirements.Desirable ExperienceAutomated warehouse or distribution centre maintenance.Conveyor systems, sortation equipment and automated material handling machinery.Motors, gearboxes, bearings, belts and mechanical drive systems.Sensors, inverters, control panels and PLC diagnostics.Experience within logistics, FMCG, manufacturing or automated distribution environments.Experience maintaining complex electromechanical systems.What's on Offer?£52,500 annual salary including shift allowance.Permanent, full-time employment.4 on, 4 off rotating day and night shift pattern.Extended periods of time off between shifts.Opportunity to work with modern automated equipment and technology.Ongoing technical training and professional development.Supportive engineering team and long-term career opportunities.Apply Today

If you are a qualified Mechanical, Electrical or Multi-Skilled Maintenance Engineer with experience maintaining automated equipment, conveyor systems or industrial machinery, we would love to hear from you.

Apply now to find out more about this opportunity in the Heathrow area!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less