Job Search

Welder Required Luton - Rotating Shifts (6.00am-2.30pm / 2.30pm-11.00pm Monday to Friday)

About the Role

As a Welder, you will play a key role in supporting production by welding piece parts and sub-assemblies using a range of welding processes. Working in accordance with engineering drawings, Welding Procedure Specifications (WPSs), work instructions and quality standards, you will help ensure components are manufactured safely, accurately and to the required specification.

You will be responsible for maintaining high standards of workmanship, ensuring compliance with coded welding requirements and contributing to the efficient delivery of production targets and customer requirements.

Key Responsibilities

Welding Operations: Carry out welding of components, piece parts and sub-assemblies in accordance with engineering drawings, specifications, approved procedures and work instructions.Coded Welding Compliance: Obtain authorisation from the Welding Engineer or Welding Specialist before undertaking coded welding activities.Equipment Preparation: Set up welding equipment and prepare weld surfaces to ensure work can be completed safely and effectively.Equipment Inspection: Ensure all welding equipment is inspected, maintained and calibrated as required before use.Consumables Management: Monitor welding consumables, support stock control activities and ensure materials are available when required.Rod Store Management: Maintain rod stores and accurately record temperature and humidity levels in accordance with established procedures.Production Recording: Record completed work accurately using ERP systems, such as Epicor, to ensure compliance with production booking requirements.Production Performance: Meet production routing times, delivery schedules and customer quality requirements.Quality and Safety: Maintain high standards of workmanship, health and safety, environmental compliance and workplace housekeeping, including 5S principles.Procedural Compliance: Follow all applicable Health & Safety, Quality and Environmental procedures.Continuous Improvement: Contribute to Lean manufacturing initiatives and continuous improvement activities to enhance quality, efficiency and productivity.

Skills, Qualifications and Experience

Essential Requirements

Time-served welding apprenticeship.Minimum of 5 years' experience as a skilled welder within an engineering or manufacturing environment.Proven ability to weld to coded standards and maintain valid coded welder qualifications and certifications.Practical experience in open-root pipe or plate welding using the following processes:TIG (GTAW)MMA (SMAW)MAG (GMAW)Experience working with carbon steel and stainless steel across a range of material thicknesses.Ability to read, interpret and work accurately from engineering drawings and welding procedures.Experience producing welds subject to inspection using ultrasonic testing (UT), radiographic testing (RT) or other non-destructive testing (NDT) methods.Experience in a manufacturing environment involving pressure vessels or piping systems, including the welding of critical components to recognised industry standards.Essential hands-on experience in brazing.Strong attention to detail and a commitment to producing high-quality work.

Desirable Experience

Practical experience in torch brazing or induction brazing.

Personal Attributes

The successful candidate will demonstrate:

A strong commitment to quality, safety and compliance.A methodical and detail-oriented approach to welding and component preparation.The ability to work effectively within a production team and meet agreed deadlines.A proactive approach to problem-solving and continuous improvement.A professional attitude towards maintaining equipment, work areas and production records.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Position: Fitter

Salary: £25,500 - £26,500 per Annum

Location: Luton

Proactive currently have an exciting opportunity for Fitters to begin work for a leading production business based in Luton.

Due to rapid company expansion and an ever growing order book, our client is hoping to recruit at least one additional Fitters to help ensure the quality and accuracy of the site's function is well maintained throughout this new and excited influx of work.

Your daily duties will include:

Stripping down and rebuilding vehiclesFitting and installing parts, storage, telematic, interior and exteriorWorking with a variety of tools and workshop equipment

To be considered for this role you will need the following skills/experience:

Previous fitting/assembly experienceExperience within the automotive industry advantageousVaried skills setPractical skills an advantageBasic Tool Kit required

The ideal candidate will:

Have good time keeping skillsPosses a positive attitude and willingness to learnBe professional and approachable

Additional Info:

7:00am - 4pm (Monday - Thursday) 1pm finish on Fridays.£25,500 - £26,500

If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail.

How to Apply:

For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jared Raymond on 07736 678635 or [email protected].

Why work with Proactive?

Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias.

When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

As a Mechanical Fitter you will be responsible for assembling, testing, inspecting and preparing units in accordance with engineering specifications, quality standards and production schedules.

You will ensure that all work is completed Right First Time (RFT) and On Time in Full (OTIF), while maintaining the highest standards of health, safety, quality and environmental compliance.

Working collaboratively within the Assembly team and across other functions, you will play a key role in ensuring customer and contractual requirements are consistently achieved.

Key Responsibilities

Read and interpret detailed engineering drawings, specifications and technical documentation.Follow relevant quality plans, procedures and work instructions to ensure products meet required standards.Assemble and disassemble units and components safely and efficiently.Carry out rigging and de-rigging activities in accordance with approved procedures and safety requirements.Prepare and paint units and components as required prior to despatch.Safely and accurately use a range of measuring and inspection equipment.Produce accurate dimensional inspection reports and strip inspection reports.Carry out pressure testing of components and complete units, ensuring all relevant documentation is accurately completed.Demonstrate competent and safe use of pneumatic and electrical hand tools.Accurately book on to and close manufacturing operations using the company ERP system.Work effectively as part of the Assembly team and with cross-functional teams to achieve contractual, quality and delivery requirements.Support the achievement of Right First Time (RFT) and On Time in Full (OTIF) targets.Carry out regular 5S activities to maintain a clean, organised and efficient working environment.Maintain a strong safety culture and contribute to a zero-accident working environment.Identify and report any health, safety, quality or process issues and deviations to the appropriate Manager or Supervisor.Ensure all activities are carried out in accordance with documented Health, Safety and Environmental procedures, instructions and regulatory requirements.Maintain consistently high standards of workmanship, quality, housekeeping and professional conduct.

What You'll Need

Essential

Minimum 4 years' experience working in a manufacturing environment, with proven mechanical fitting experience.A recognised qualification in a mechanical engineering or mechanical discipline.Ability to read and interpret engineering drawings and technical documentation.Competent use of mechanical measuring and inspection equipment.Strong communication, teamwork and problem-solving skills.A strong commitment to health and safety and quality standards.

Desirable

Time-served mechanical craft apprenticeship.Experience within a high-value engineering or complex manufacturing environment.Familiarity with ERP/MRP systems and 5S methodology.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

We are looking for a Test Engineer to join our engineering and manufacturing team, responsible for the testing, validation and reporting of electrical equipment in accordance with established quality procedures, engineering standards and safety requirements.

This is a hands-on technical role at the forefront of testing and engineering innovation. You will work with high-voltage, high-power electrical equipment, supporting both current manufacturing operations and the development of future test capabilities.

Working closely with Electrical, Hydraulic, Quality and Production teams, you will ensure that test plans are delivered effectively, equipment meets required standards and all testing is carried out safely, accurately and efficiently.

Key Responsibilities

Testing & Technical Delivery

Perform acceptance and performance testing on large-scale induction motors and associated electrical equipment, including systems up to 13.8 kV and 3.2 MW.Prepare and operate large-scale electrical test setups in accordance with approved test plans and engineering requirements.Monitor, measure, record and analyse test data accurately.Identify and investigate abnormal test results, supporting fault-finding and technical problem solving where required.Complete and maintain accurate test documentation and reports.Ensure test reports are completed and entered into relevant engineering systems within 24 hours of test completion.Support the development, improvement and implementation of test data acquisition and automated test control systems.Ensure test equipment is correctly configured, maintained and suitable for the required test activity.

Health, Safety & Quality

Maintain the highest standards of Health & Safety when working in a high-risk, high-voltage test environment.Follow all relevant safe systems of work, risk assessments, procedures and engineering instructions.Ensure test equipment is operational, maintained and within its required calibration period.Work in accordance with approved quality plans, test procedures and engineering standards.Ensure testing activities provide accurate, traceable and reliable results that support product quality and integrity.Report and escalate safety, quality or equipment issues promptly.

Collaboration & Continuous Improvement

Coordinate with Production teams to support testing schedules for new units, repairs and spare equipment.Work collaboratively with Electrical, Hydraulic, Quality and other Engineering teams to resolve technical issues.Participate in lean manufacturing and continuous improvement initiatives, including 5S and structured problem solving.Identify opportunities to improve test efficiency, reliability, quality and safety.Support the introduction of new test methods, equipment and technologies.Maintain a clean, organised and professional test environment.

Essential Requirements

Level 4/5 qualification (HNC/HND or equivalent) in Electrical Engineering or a related discipline.Practical experience working with high-voltage electrical equipment.Demonstrable experience of large-scale electrical test setups and power systems.Experience working to formal test procedures, test plans and quality requirements.Experience collecting, recording and interpreting electrical test data.Experience with instrumentation and/or data acquisition systems.Strong understanding and commitment to Health & Safety, particularly when working with high-voltage or high-energy systems.Strong attention to detail and ability to produce accurate technical documentation.Practical, proactive and flexible approach to engineering problem solving.Positive "can-do" attitude with the ability to work effectively as part of a multidisciplinary team.Candidates must have the right to work in the UK.

Desirable Experience

Knowledge of relevant IEC and ISO standards, particularly IEC 60034 and ISO 9906.Experience carrying out dielectric, insulation and performance testing.Experience testing large induction motors or rotating electrical machines.Experience with variable speed drives (VSDs).Knowledge or practical experience of hydraulic systems.Experience developing or using automated test control systems.Experience with LabVIEW or similar test and data acquisition software.Experience working within clean, controlled or safety-critical test environments.Experience with lean manufacturing, 5S and structured problem-solving methodologies.

Health & Safety Requirements

Due to the safety-critical nature of this position, any offer of employment will be conditional upon the successful completion of a relevant occupational health assessment.

The assessment will be arranged following a conditional offer and is intended to confirm that the successful candidate is fit to work safely within a high-risk engineering environment, including exposure to high-voltage testing.

All assessments will be conducted in accordance with applicable health and safety legislation and the Company's internal requirements.

What We Offer

This role provides an opportunity to work on electrical equipment and high-voltage testing, while contributing to the development of modern test technologies and processes.

You will have the opportunity to:

Work with high-voltage, high-power electrical systems.Develop your expertise in electrical testing and instrumentation.Contribute to automated test and data acquisition technologies.Work alongside experienced multidisciplinary engineering teams.Drive improvements in testing, quality, safety and efficiency.Develop your career within a technically challenging engineering environment.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

We are currently recruiting for an experienced and technically proficient Test Technician to join the engineering and manufacturing operation of a globally renowned organisation based in Luton.

This is an excellent opportunity for an experienced Test Technician, Electronics Technician or Electrical Technician with strong PCB testing and fault-finding expertise. The successful candidate will be responsible for testing, diagnosing, repairing and maintaining electronic assemblies and associated test equipment, ensuring products meet the required quality, safety and performance standards.

The Role

Working as part of a skilled Engineering and Production team, you will carry out electrical and electronic testing, fault diagnosis, PCB repair and rework activities within a fast-paced manufacturing environment.

The role requires a methodical and technically accurate approach, strong attention to detail and the ability to work effectively under pressure while meeting production requirements and quality standards.

Key ResponsibilitiesCarry out electrical and electronic testing of PCBs and electronic assemblies, including products used in high-voltage applications.Perform component-level fault-finding and diagnosis on PCBs, identifying root causes and implementing effective corrective actions.Investigate failures involving test equipment, production equipment and electronic assemblies.Repair and rework faulty PCBs, including SMT and through-hole components.Use a range of electrical and electronic test equipment, diagnostic equipment and test fixtures.Interpret electrical schematics, circuit diagrams, wiring diagrams and technical drawings.Complete test reports, fault reports and relevant technical documentation.Support the maintenance, troubleshooting and repair of test equipment.Work to defined test procedures, engineering instructions, ESD controls and quality standards.Contribute to a safe, efficient and quality-focused manufacturing environment.Required ExperienceProven hands-on experience in electrical/electronic testing, PCB fault-finding and component-level repair, including SMT and through-hole rework.Experience using electrical/electronic test equipment and investigating faults with test or production equipment.Experience testing electronic assemblies, ideally within high-voltage applications.Ability to interpret schematics, wiring diagrams and technical drawings, with a sound understanding of root-cause analysis and corrective action.Previous experience producing technical/test documentation and working with an ERP/MRP system.Experience within a structured manufacturing, engineering or production environment, with a strong focus on quality, safety and output.Good understanding of ESD controls and safe working practices.A methodical, detail-focused approach with the ability to work to defined procedures and meet production deadlines.Strong communication and teamwork skills, with the flexibility to work across Engineering, Production and Quality functions.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Assembly Operators Required to work for manufacturing company based in St. Neots, immediate starts available for the right candidates.

Key Responsibilities:

Assembling mechanical parts / components with high accuracy Conduct quality checks to ensure products meet specifications.Collaborate with team members to meet production targets.Maintain a clean and organised work area.Adhere to all safety guidelines and protocols.

Qualifications and Experience:

Previous experience within assembly based workability to use hand and power toolsStrong attention to detailA tolerance to the smell of gluePrevious experience in a similar role is beneficial but not essential.

Additional Info:

Working hours: Monday - Thursday 07:30am 16:30 and Friday 07:30am - 13:30.Rate: £12.71 per hourStart date: ASAP

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Position: Assembly Operative

Salary: £12.71 per hour

Location: Bedford

Proactive currently have an exciting opportunity for a Assembly Operatives to begin work for a leading manufacturing and production business based in Bedford.

Due to rapid company expansion and an ever growing order book, our client is hoping to recruit at least one additional Assembly Operatives to help ensure the quality and accuracy of the site's function is well maintained throughout this new and excited influx of work.

Assembly Operators Required to work for manufacturing company based in Bedford, immediate starts available for the right candidates.

Key Responsibilities:

Assembling mechanical parts / components with high accuracy Conduct quality checks to ensure products meet specifications.Collaborate with team members to meet production targets.Maintain a clean and organised work area.Adhere to all safety guidelines and protocols.

Qualifications and Experience:

Previous experience within assembly based workability to use hand and power toolsStrong attention to detailPrevious experience in a similar role is beneficial but not essential.

Additional Info:

Working hours: Monday - Thursday 07:00am - 4:30pm.Rate: £12.71 per hourStart date: ASAP

If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail.

How to Apply:

For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jared Raymond on 07736 678635 or [email protected].

Why work with Proactive?

Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias.

When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Position: Assembly Operative

Salary: £12.71 per hour (Permanent Contract)

Location: Luton

Proactive currently have an exciting opportunity for a Assembly Operatives to begin work for a leading manufacturing and production business based in Luton.

Due to rapid company expansion and an ever growing order book, our client is hoping to recruit at least one additional Assembly Operatives to help ensure the quality and accuracy of the site's function is well maintained throughout this new and excited influx of work.

Assembly Operators Required to work for manufacturing company based in Luton, immediate starts available for the right candidates.

Key Responsibilities:

Assembling mechanical parts / components with high accuracy Conduct quality checks to ensure products meet specifications.Collaborate with team members to meet production targets.Maintain a clean and organised work area.Adhere to all safety guidelines and protocols.

Qualifications and Experience:

Previous experience within assembly based workability to use hand and power toolsStrong attention to detailA tolerance to the smell of gluePrevious experience in a similar role is beneficial but not essential.

Additional Info:

Working hours: Monday - Thursday 07:30am 16:30 and Friday 07:30am - 13:30.Rate: £12.71 per hourStart date: ASAP

If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail.

How to Apply:

For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jared Raymond on 07736 678635 or [email protected].

Why work with Proactive?

Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias.

When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

Job Role: Test Technician

Rate: £15.00ph - £20.00ph

Location: Luton

Proactive are currently in search of a skilled test technician to start work as soon as possible. This is an exciting opportunity working for a market leading electronics manufacturing company based in Luton. As a test technician you would be responsible for technical fault analysis including fault finding to a component level. Enhanced testing procedures for all our products. Testing of complete production units. Customer returns diagnosis and repair. Test and failure reports for customers.

Job Responsibilities

Comfortable working in a fast paced and high-pressure environment within an existing product line team.The Test Technician has a positive can-do attitude and drives quick resolve on unit failure root cause and fix. Investigate and repair to a component level pcbs and test equipment failures.Maintenance of all test equipment and response to down time and it's prevention.Testing of PCBs including High Voltage applications with test report write up.Familiar with IPC610 Class workmanship and production process.Proficient reworker of SMT and Thru hole technology components.Drive down Scrap and Rework with suggestions and input.Fluent in writing test reports and fault analysis.Continually work with colleagues to ensure that all processes meet ongoing best practice, ISO compliance and SIL complianceWork closely with RMA Team to resolve warranties by compiling customer reports in the form of triage reports, problem solving analysis and communicating with the customer cause and resolve.Work collaboratively with other departments for resolve and improvement of products and services.Able to communicate quality, technical product and documentation requirements to colleagues and suppliers in a concise and helpful manner.

Qualifications

Education level required

Formal Electronics or Electrical Qualification (GNVQ level 3,OND/ONC or degree) Proficient in English and Mathematics.Years and area of experience required Minimum of 5 years in a similar role

Technical knowledge

ISO9001 auditorUnderstanding of technical drawings.Knowledge of Explosive atmospheres.

Soft skills

Familiar with Electronics or Electrical Engineering manufacturingConfident communicatorAttention to detailPositive can-do attitude

How to Apply:

For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on 07539 656 030 or [email protected]

Why work with Proactive?

Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias.

When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role!

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less

We are currently recruiting for an experienced and technically proficient Test Technician to join the engineering and manufacturing operation of a globally renowned organisation based in Luton.

This is an excellent opportunity for an experienced Test Technician, Electronics Technician or Electrical Technician with strong PCB testing and fault-finding expertise. The successful candidate will be responsible for testing, diagnosing, repairing and maintaining electronic assemblies and associated test equipment, ensuring products meet the required quality, safety and performance standards.

The Role

Working as part of a skilled Engineering and Production team, you will carry out electrical and electronic testing, fault diagnosis, PCB repair and rework activities within a fast-paced manufacturing environment.

The role requires a methodical and technically accurate approach, strong attention to detail and the ability to work effectively under pressure while meeting production requirements and quality standards.

Key ResponsibilitiesCarry out electrical and electronic testing of PCBs and electronic assemblies, including products used in high-voltage applications.Perform component-level fault-finding and diagnosis on PCBs, identifying root causes and implementing effective corrective actions.Investigate failures involving test equipment, production equipment and electronic assemblies.Repair and rework faulty PCBs, including SMT and through-hole components.Use a range of electrical and electronic test equipment, diagnostic equipment and test fixtures.Interpret electrical schematics, circuit diagrams, wiring diagrams and technical drawings.Complete test reports, fault reports and relevant technical documentation.Support the maintenance, troubleshooting and repair of test equipment.Work to defined test procedures, engineering instructions, ESD controls and quality standards.Contribute to a safe, efficient and quality-focused manufacturing environment.Required ExperienceProven hands-on experience in electrical/electronic testing, PCB fault-finding and component-level repair, including SMT and through-hole rework.Experience using electrical/electronic test equipment and investigating faults with test or production equipment.Experience testing electronic assemblies, ideally within high-voltage applications.Ability to interpret schematics, wiring diagrams and technical drawings, with a sound understanding of root-cause analysis and corrective action.Previous experience producing technical/test documentation and working with an ERP/MRP system.Experience within a structured manufacturing, engineering or production environment, with a strong focus on quality, safety and output.Good understanding of ESD controls and safe working practices.A methodical, detail-focused approach with the ability to work to defined procedures and meet production deadlines.Strong communication and teamwork skills, with the flexibility to work across Engineering, Production and Quality functions.

Proactive Global is committed to equality in the workplace and is an equal opportunity employer.
Proactive Global is acting as an Employment Business in relation to this vacancy.

Read less